Contact Form 2200 SERIES CONVEYORS: Flat Belt Center Drive
Specifications:
- Sealed ball bearings (not included on Nose Bar)
- Loads up to 120 lbs.* (54 Kg)
- Belt speeds up to 264 ft/min (81 M/min)
- Belt widths: 1.75” (44) to 24” (610)
- Conveyor lengths: 24” (610) to 24’ (5,486)
- 1.25” (32) diameter drive and idler pulleys turn
approximately 4.2” (107) of belt per revolution - V-grooved 14 gauge stainless steel bedplate
- 12 mm diameter integral drive shaft
- Metric fasteners
-
models available
Features/Benefits:
- Center Drive module frees up both ends of conveyor for operator and machine interface
- The Center Drive Module can be easily repositioned along the length of the conveyor
- Maintenance free gas spring belt tensioner maintains uniform belt tension
- Aluminum die cast head plates eliminate painted end surfaces
- V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications
- Non V-guided belts use our patented belt tracking cams, offering you the widest belt selection possible
- Strong, box-like construction resists damaging frame twist
- 2” (51) of belt take up extends conveyor belt life
- Stand mounting brackets are easily re-positioned along the t-slot
- Special length conveyors to .12” (4) increments at standard price and delivery
- Motion sensor switch ready
Optional 8mm Nose Bar Transfer
is available at both ends.
Max Belt Speed is 75’/min (22M/min)
 |
 |
Center Drive Module |
Gas Spring Belt Tensioner |
| STANDARD SIZES | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Conveyor Width Reference | 02 | 03 | 04 | 05 | 06 | 08 | 10 | 12 | 18 | 21 | 24 |
| Conveyor Belt Width (W) | 1.75” (44) |
2.75” (70) |
3.75” (95) |
5” (127) |
6” (152) |
8” (203) |
10” (254) |
12” (305) |
18” (457) |
21” (533) |
24” (610) |
| Conveyor Length Reference | 0200 | 0001 increments up to... | 2400 | ||||||||
| Conveyor Length (L) | 2’ (610) | .12” (3) increments up to... | 24’ (7,315) | ||||||||
Part Reference Guide (2.90 MB PDF)
Notes:
-
Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
-
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
-
Dimensions are represented in inches, feet, and (millimeters).
-
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
-
Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.