Contact Form 2200 SERIES CONVEYORS: Flat Belt End Drive
Specifications:
- Sealed ball bearings
- Loads up to 80 lbs.* (36 Kg)
- Belt speeds up to 264 ft/min. (81 M/min.)
- Belt widths: 1.75” (44) to 24” (610)
- Conveyor lengths: 18” (457) to 18’ (5,486)
- 1.25” (32) diameter drive & idler pulleys turn
approximately 4.2” (107) of belt per revolution - 12 mm diameter integral drive shaft
- Optional 1” (25) diameter gang drive pulleys turn
approximately 3.4” (86) of belt per revolution - V-grooved 14 gauge stainless steel bedplate
- Metric fasteners
models available
Features/Benefits:
- Quick 5 minute belt change
- Rack and pinion belt tensioning for fast, accurate single point belt tensioning
- Aluminum die cast head plates eliminate painted surfaces
- V-groove bed plate with guided belt provides positive belt tracking, even under demanding side load applications
- Non V-guided belts use our patented belt tracking cams, offering you the widest belt selection possible
- Strong, box-like construction resists damaging frame twist
- 50% more belt take-up extends conveyor belt life
- Belt take-up indicators for “at a glance” readings of remaining belt life
- Stand mounting brackets are easily re-positioned along the T-slot
- Special length conveyors to .12” (4) increments at standard price and delivery
- Motion sensor switch ready
- Gang Drive conveyor includes a bottom wiper to remove debris from belt
Optional Gang Drive Pulleys
Gang Drive pulleys allow you to drive
multiple conveyors with one Gearmotor
Optional 8mm Nose Bar
Transfer
is available at
non-driven end.
Max Belt Speed is
75’/min (22M/min)
Change Belts in Less than 5 Minutes! |
||
 |
 |
 |
Loosen fasteners and |
Remove old belt and replace. |
Adjust tension on new belt, |
| STANDARD SIZES | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Conveyor Width Reference | 02 | 03 | 04 | 05 | 06 | 08 | 10 | 12 | 18 | 21 | 24 |
| Conveyor Belt Width (W) | 1.75” (44) |
2.75” (70) |
3.75” (95) |
5” (127) |
6” (152) |
8” (203) |
10” (254) |
12” (305) |
18” (457) |
21” (533) |
24” (610) |
| Conveyor Length Reference | 0200 | 0001 increments up to... | 1800 | ||||||||
| Conveyor Length (L) | 2’ (610) | .12” (3) increments up to... | 18’ (5,486) | ||||||||
Note: Lengths 13’ to 18’ available in widths 6” to 24” only.
Gang Drive Conveyors: Non-V-Guided belts up to 24” (610) wide, V-Guided belts up to 18” (457) wide
Gang Drive Conveyors: Non-V-Guided belts up to 24” (610) wide, V-Guided belts up to 18” (457) wide
Notes:
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
- Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
- Dimensions are represented in inches, feet, and (millimeters).
- Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
- Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.