Home About Dorner Contact Us Distributors TradeshowsSite Map

 
Dorner Performance Newsletter


 

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 2200 Series > Flat Belt End Drive

2200 SERIES CONVEYORS: Gearmotors



 

Gearmotor Selection Steps

Refer to Gearmotor Mounting Packages for directions on
Selecting a Gearmotor Mounting Package and Gearmotor.


Gearmotor Accessories

90˚ Gearmotor Heat Sink
  • Reduces gear head surface
    temperature by up to 50˚F (10˚C)
  • Compatible with Standard and Heavy Load 90˚ Gearmotors
  • Black anodized aluminum
Part Number Description
694025 90˚ Gearmotor Heat Sink



 

Light Load, Fixed Speed


CHART 1

Parallel Shaft


  • Sealed Gearmotor
  • Totally enclosed, Non-ventilated
  • Includes Switch, Cord & Overload Protection
  • 115V, 1 Phase
  • Non-reversing
  • 60 Hz
Part Number RPM Gearmotor
Type 		1 Ph Hp 1 Ph Kw 1 Ph FLA In-lbs N-m
62M036PL411F(N)
62M015PL411F(N)		 42
100		 L
L		 0.03
0.03		 0.025
0.025		 0.49
0.49		 36
15		 4.1
1.7
(n) = Reversing capability.
N = No reversing switch. R = With reversing switch.

 

CHART 2

Parallel Shaft


  • Totally enclosed, Fan Cooled
  • IP44 Protection Rating
  • Non-reversing
  • 50 Hz
  • Order starter separately, See page 37
Part Number RPM Gearmotor Type 1 Phase 3 Phase N-m Starter
Chart
Kw FLA Kw FLA
62Z028PL421FN
62Z028PL4(vp)FN
62Z008PL421FN
62Z008PL4(vp)FN		 41
41
144
144		 L
L
L
L		 0.022
n/a
0.022
n/a		 0.31
n/a
0.31
n/a		 n/a
0.020
n/a
0.020		 n/a
.22/.13
n/a
.22/.13		 2.6
3.5
0.9
1.2		 H
H
H
H
(vp) = Voltage and Phase
23 = 230V, 3 phase
43 = 400V, 3 phase
Note: When buying a gearmotor only without the starter, the customer must supply their own on/off switch
and motor overload protection to comply with the CE Safety Directive.

 

Light Load, Variable Speed


CHART 3

Parallel Shaft


  • 130 Volts DC
  • Sealed Gearmotor
  • Totally enclosed, Non-ventilated
  • 300 - 2500 RPM motor
  • Order controller separately, See page 36
Part Number RPM Gearmotor
Type 		Hp Kw FLA In-lbs N-m Vari - Speed
Control Chart
62M060PLD3DEN
62M018PLD3DEN		 42
139		 V
V		 0.06
0.06		 0.04
0.04		 0.48
0.48		 65
21		 7.4
2.4		 A
A

 

 

Standard Load, Fixed Speed


CHART 4

90˚

  • Sealed Gearmotor
  • NEMA 42 CZ C Face
  • Totally enclosed, Fan cooled
  • 115V 1 phase includes switch,
    Cord & Overload protection
  • 208-230/460V 3 phase
    wiring by others
  • 60 Hz
  • Order 3 phase starter separately,
    See page 37
Part Number RPM Gearmotor
Type 		1 Phase 3 Phase In-lbs N-m 3 Phase
Starter Chart
Hp Kw FLA Hp Kw FLA
32M060HL4(vp)F(n)
32M040HL4(vp)F(n)
32M020HL4(vp)F(n)
32M010HL4(vp)F(n)
32M005HL4(vp)F(n)		 29
43
86
173
345		 S
S
S
S
S		 0.25
0.25
0.25
0.25
0.25		 0.19
0.19
0.19
0.19
0.19		 5
5
5
5
5		 0.25
0.25
0.25
0.25
0.25		 0.19
0.19
0.19
0.19
0.19		 1.2/0.6
1.2/0.6
1.2/0.6
1.2/0.6
1.2/0.6		 226
237
142
78
41		 25.5
26.8
16
8.8
4.6		 L
L
L
L
L
(vp) = Voltage and Phase
11 = 115V, 1 phase
23 = 208 - 230 / 460V, 3 phase
(n) = Reversing Capability
N = No reversing switch.
R = With reversing switch (115V, 1 phase only)


CHART 5

Parallel Shaft


  • Sealed Gearmotors
  • Totally enclosed, Fan cooled
  • 115V 1 phase includes switch,
    Cord & Overload protection
  • 230V 3 phase wiring by others
  • 60 Hz
  • Order 3 phase starter separately,
    See page 37
Part Number RPM Gearmotor Type 1 Phase 3 Phase N-m 3 Phase Starter Chart
Hp Kw FLA in-lbs Hp Kw FLA in-lbs
62M180PS4(vp)F(n)
62M060PS4(vp)F(n)
62M030PS4(vp)F(n)
62M020PS4(vp)F(n)
62M010PS4(vp)F(n)
62M005PS4(vp)F(n)		 10
29
58
86
173
345		 S
S
S
S
S
S		 0.08
0.17
0.17
0.17
0.17
0.17		 0.06
0.13
0.13
0.13
0.13
0.13		 1.2
1.9
1.9
1.9
1.9
1.9		 341
270
135
90
45
25		 0.17
0.17
0.38
0.38
0.38
0.38		 0.13
0.13
0.28
0.28
0.28
0.28		 1.0
1.0
1.9
1.9
1.9
1.9		 341
270
250
167
115
58		 38.5
30.5
15.3
10.2
5.1
2.8		 L
L
M
M
M
M
(vp) = Voltage and Phase
11 = 115V, 1 phase
23 = 230V, 3 phase
(n) = Reversing Capability
N = No reversing switch.
R = With reversing switch (115V, 1 phase only)

CHART 6

90˚

  • Sealed Gearmotor
  • IEC 63 B5 C Face
  • IP 55 Protection Rating
  • Totally enclosed, Fan cooled
  • Non-reversing
  • 50 Hz
  • Order starter separately, See page 37
Part Number RPM Gearmotor Type 1 Phase 3 Phase N-m 3 Phase Starter Chart
Kw FLA Kw FLA
62Z060HS4(vp)FN
62Z040HS4(vp)FN
62Z020HS4(vp)FN
62Z010HS4(vp)FN
62Z005HS4(vp)FN		 23
35
70
140
280		 S
S
S
S
S		 0.18
0.18
0.18
0.18
0.18		 1.6
1.6
1.6
1.6
1.6		 0.18
0.18
0.18
0.18
0.18		 1.4/.8
1.4/.8
1.4/.8
1.4/.8
1.4/.8		 26.4
28.9
19.4
10.7
5.6		 I
I
I
I
I
(vp) = Voltage and Phase
21 = 230V, 1 phase
23 = 230V, 3 phase
43 = 400V, 3 phase
Note: When buying a gearmotor only without the starter, the customer must supply their own on/off switch and motor overload protection to comply with the CE Safety Directive.

 

Standard Load, Variable Speed


CHART 7

90˚

  • 130 Volts DC
  • Sealed Gearmotor
  • NEMA 42 CZ C Face
  • Totally enclosed, Fan cooled
  • 300 - 2500 RPM motor
  • Order controller separately,
    See page 36
Part Number RPM Gearmotor Type Hp Kw FLA In-lbs N-m Vari - Speed
Control Chart
22M060HSD3DEN
22M040HSD3DEN
22M020HSD3DEN
22M010HSD3DEN
22M005HSD3DEN		 42
63
125
250
500		 S
S
S
S
S		 0.33
0.33
0.33
0.33
0.33		 0.25
0.25
0.25
0.25
0.25		 2.3
2.3
2.3
2.3
2.3		 198
163
98
54
28		 22.4
18.4
11.1
6.1
3.2		 A
A
A
A
A

CHART 8

90˚

  • 130 Volts DC
  • Sealed Gearmotor
  • NEMA 42 CZ C Face
  • Totally enclosed, Fan cooled
  • 300 - 2500 RPM motor
  • Order controller separately, See page 36
Part Number RPM Gearmotor Type Hp Kw FLA In-lbs N-m Vari - Speed
Control Chart
32M060HL423EN
32M040HL423EN
32M020HL423EN
32M010HL423EN
32M005HL423EN		 29
43
86
173
345		 S
S
S
S
S		 0.25
0.25
0.25
0.25
0.25		 0.19
0.19
0.19
0.19
0.19		 1.6 /.97
1.6 /.97
1.6 /.97
1.6 /.97
1.6 /.97		 226
237
142
78
41		 25.5
86.8
16
8.8
4.6		 D and E
D and E
D and E
D and E
D and E
* = At 60 Hz

CHART 9

90˚

  • Variable Frequency Drive, 25-63 Hz
  • Sealed Gearmotor
  • IEC 63 B5 C Face
  • IP 55 Protection Rating
  • Totally enclosed, Fan cooled
  • 230V, 3 phase
  • Order controller separately, See page 36
Part Number RPM Gearmotor Type 3 Ph
Kw		 3 Ph
FLA		 N-m* Vari - Speed
62Z060HS423EN
62Z040HS423EN
62Z020HS423EN
62Z010HS423EN
62Z005HS423EN		 23
35
70
140
280		 S
S
S
S
S		 0.18
0.18
0.18
0.18
0.18		 1.4
1.4
1.4
1.4
1.4		 26.4
28.9
19.4
10.7
5.6		 B
B
B
B
B
* = At 50 Hz
Note: When buying a gearmotor only without the starter, the customer must supply
their own on/off switch and motor overload protection to comply with the CE Safety Directive.

CHART 10

Parallel Shaft


  • 130 Volts DC
  • Sealed Gearmotor
  • Totally enclosed, Non-ventilated
  • 300 - 2500 RPM motor
  • Order controller separately, See page 36
Part Number RPM Gearmotor Type Hp Kw FLA in-lbs N-m Vari - Speed
Control Chart
62M180PSD3DEN
62M060PSD3DEN
62M030PSD3DEN
62M020PSD3DEN
62M010PSD3DEN
62M005PSD3DEN		 14
42
83
125
250
500		 S
S
S
S
S
S		 0.12
0.25
0.25
0.25
0.33
0.25		 0.09
0.19
0.19
0.19
0.25
0.19		 1
1.8
1.8
1.8
2.3
1.8		 341
270
135
90
72
25		 38.5
30.5
15.3
10.2
8.1
2.		 A
A
A
A
A
A

CHART 11

90˚

  • Variable frequency drive, 10 to 60 Hz
  • Sealed Gearmotor
  • Totally enclosed, Fan cooled
  • 230 Volts / 3 Phase, VFD duty
  • Order controller separately, See page 36
Part Number *RPM Gearmotor Type Hp Kw FLA in-lbs N-m Vari - Speed
Control Chart
62M180PS423EN
62M060PS423EN
62M030PS423EN
62M020PS423EN
62M010PS423EN
62M005PS423EN		 10
29
58
86
173
345		 S
S
S
S
S
S		 0.17
0.17
0.38
0.38
0.38
0.38		 0.13
0.13
0.28
0.28
0.28
0.28		 1.0
1.0
1.9
1.9
1.9
1.9		 341
270
250
167
115
58		 38.5
30.5
28.3
18.9
13
6.5		 D and E
D and E
D and E
D and E
D and E
D and E
* = At 60 Hz

Heavy Load, Fixed Speed


CHART 12

90˚

  • Sealed Gearmotor
  • NEMA 56 C Face
  • Totally enclosed, Fan cooled
  • 115V 1 phase includes switch,
    Cord & Overload protection
  • 208-230/460V 3 phase
    wiring by others
  • 60 Hz
  • Order 3 phase starter separately,
    See page 37
Part Number RPM Gearmotor Type 1 Phase 3 Phase in-lbs N-m 3 Phase Starter Chart
Hp Kw FLA Hp Kw FLA
32M060HS4(vp)F(n)
32M040HS4(vp)F(n)
32M020HS4(vp)F(n)
32M010HS4(vp)F(n)
32M005HS4(vp)F(n)		 29
43
86
173
345		 H
H
H
H
H		 0.5
0.5
0.5
0.5
0.5		 0.37
0.37
0.37
0.37
0.37		 7.4
7.4
7.4
7.4
7.4		 0.5
0.5
0.5
0.5
0.5		 0.37
0.37
0.37
0.37
0.37		 2.1-2/1
2.1-2/1
2.1-2/1
2.1-2/1
2.1-2/1		 226
247
248
156
81		 25.5
27.9
27.9
17.6
9.1		 M
M
M
M
M
(vp) = Voltage and Phase
11 = 115V, 1 phase
23 = 208 - 230 / 460V, 3 phase
(n) = Reversing Capability
N = No reversing switch.
R = With reversing switch (115V, 1 phase only)

CHART 13

90˚ Air Gearmotor

  • Sealed Gearmotor
  • Nema 56 C Face
  • Non-reversing
  • Includes muffler, filter, regulator & lubricator
  • Use with standard load mounting package
Part Number *RPM Gearmotor Type Hp* in-lbs** N-m**
62M060HH000FN
62M040HH000FN
62M020HH000FN
62M020HH000FN
62M005HH000FN		 29
43
86
173
345		 H
H
H
H
H		 .5
.5
.5
.5
.5		 226
247
248
156
81		 25.5
27.9
27.9
17.6
9.1
* = At 40 PSI (2,8 bar) line pressure
** = At 1725 RPM from motor, 25 CFM

Heavy Load, Variable Speed


CHART 14

90˚

  • 90V DC
  • Sealed Gearmotor
  • NEMA 56 C Face
  • Totally enclosed, Fan cooled
  • 300 - 2500 RPM motor
  • Order controller separately, See page 36
Part Number RPM Gearmotor Type Hp Kw FLA in-lbs N-m Vari - Speed
Control Chart
32M060HSD9DEN
32M040HSD9DEN
32M020HSD9DEN
62M010HHD9DEN
62M005HHD9DEN		 42
63
125
250
500		 H
H
H
H
H		 0.5
0.5
0.5
0.75
0.75		 0.37
0.37
0.37
0.50
0.50		 5
5
5
7.5
7.5		 198
215
196
108
56		 22.4
24.3
22.1
12.2
6.3		 C
C
C
C
C

 

CHART 15

90˚

  • Variable Frequency Drive, 6 - 60 Hz
  • Sealed Gearmotor
  • NEMA 56 C Face
  • Totally enclosed, Non-ventilated
  • 230/460 Volts, 3 Phase
  • Order controller separately, See page 36
Part Number RPM* Gearmotor Type 3 Phase in-lbs* N-m* Vari - Speed
Control Chart
Hp Kw FLA
32M060HS423EN
32M040HS423EN
32M020HS423EN
32M010HS423EN
32M005HS423EN		 29
43
86
173
345		 H
H
H
H
H		 0.5
0.5
0.5
0.5
0.5		 0.37
0.37
0.37
0.50
0.50		 1.6/.8
1.6/.8
1.6/.8
1.6/.8
1.6/.8		 226
247
248
156
81		 25.5
27.9
27.9
17.6
9.1		 D and E
D and E
D and E
D and E
D and E
* At 60 Hz

CHART 16

90˚

  • Integrated motor control
  • Variable frequency drive, 10 to 80 Hz
  • Digital display with start/stop
    and forward/reverse keypad
  • NEMA 56 C face sealed gearmotor
  • Totally enclosed, Fan cooled
  • 115/230 Volts, 1 Phase input voltage
Part Number RPM* Gearmotor Type Hp Kw Controller
Amps		 in-lbs* N-m*
32M060HS411EC
32M040HS411EC
32M020HS411EC
32M010HS411EC
32M005HS411EC		 29
43
86
173
345		 H
H
H
H
H		 0.5
0.5
0.5
0.5
0.5		 0.37
0.37
0.37
0.37
0.37		 12.4/6.2
12.4/6.2
12.4/6.2
12.4/6.2
12.4/6.2		 226
247
248
156
81		 25.5
27.9
27.9
17.6
9.1
* At 60 Hz

Variable Speed Controllers

 

CHART A

 

  • PWM DC control
  • Nema 1 enclosure
  • Line cord & Motor cord
  • On / Off switch for 62MD1134
  • Forward / Off / Reverse switch for 62MD1134R
  • Speed potentiometer
  • Mounting hardware
Part Number Input Volts Input Phase Input Hz Output Volts * Max Amps Reversing
62MD1134
62MD1134R		 115
115		 1
1		 60
60		 130VDC
130VDC		 3.2
5		 No
Yes

CHART B


  • VFD control
  • IP 65 enclosure
  • EMC filter
  • Speed potentiometer
  • Mounting hardware
  • Line cord & motor cord
  • VFD control
  • Chassis mount
  • EMC filter
  • Wiring by others
Part Number Input Volts Input Phase Input Hz Output Volts Out Phase * Max Kw Max Amps Reversing
62(c)V2122
62ZV2122C		 230
230		 1
1		 50
50		 230
230		 3
3		 0.372
0.37		 2
2.2		 Yes
Yes
(c) = Electrical Configuration
F = CE French
G = CE German
U = CE Great Britain
Note: When buying a chassis mount control, the customer must
provide wiring that complies with Ce Safety Directives.

CHART C

 

  • PWM DC control
  • NEMA 1 enclosure
  • Line cord & Motor cord
  • On / Off switch for 62MD1192 & 62MD1193
  • Forward / Off / Reverse switch for 62MD1192R & 62MD1193R
  • Speed potentiometer
  • Mounting hardware
Part Number Input Volts Input Phase Input Hz Output Volts * Max Amps Reversing
62MD1192
62MD1192R
62MD1193
62MD1193R		 115
115
115
115		 1
1
1
1		 60
60
60
60		 90VDC
90VDC
90VDC
90VDC		 5
5
7.5
7.5		 No
Yes
No
Yes
*See FLA from motor charts

CHART D

 

  • Full feature VFD control
  • NEMA 4 enclosure
  • Digital display
  • Keypad with Start / Stop, Forward / Reverse and speed variations
  • Includes cord to motor
  • Power to controller by others
  • 62MV1122 includes line cord to controller
  • Mounting hardware
Part Number Input Volts Input Phase Input Hz Output Volts Output Phase Max Hp * Output Amps Reversing A Width B Depth
62MV1122
62MV2122
62MV1121
62MV2121
62MV2127
62MV2322
62MV2327
62MV4341
62MV4347		 115
230
115
230
230
230
230
460
460		 1
1
1
1
1
3
3
3
3		 60
60
60
60
60
60
60
60
60		 230
230
230
230
230
230
230
460
460		 3
3
3
3
3
3
3
3
3		 .5
.5
1
1
2
.5
2
1
2		 2.2
2.2
4
4
6.8
2.2
6.8
2
3.4		 Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes		 6.1 (155)
6.1 (155)
6.1 (155)
6.1 (155)
6.1 (155)
4.7 (119)
6.1 (155)
4.7 (119)
6.1 (155)		 3.8 (96)
3.8 (96)
4.4 (112)
4.4 (112)
5.3 (134)
3.8 (96)
5.3 (134)
3.8 (96)
4.4 (112)
*See FLA from motor charts

 

CHART E

 

  • VFD control
  • Nema 1 enclosure
  • Line cord and Motor cord
  • On / Off switch
  • Speed potentiometer
  • Mounting hardware
  • Forward / Reverse switch
Part Number Input Volts Input Phase Input Hz Output Volts Out Phase Max Kw * Max Amps Reversing
62MV1122B
62MV1122BR		 115
115		 1
1		 60
60		 230
230		 3
3		 0.5
0.5		 2.4
2.4		 No
Yes

 


Manual Motor Starters


Manual motor starts are manual electrical disconnects that provide motor overload protection
and are required by the National Electric Code (NEC) for safe motor operation.
  • IP 55 Enclosure
  • Push button Start / Stop
  • Includes mounting hardware

CHART H

  • 230V, 1 phase includes cord, plug & starter
  • 230/400V, 3 phase wiring to starter by others
  • Wiring between motor & starter provided when
    ordered together
  • 50 Hz
Part Number In Volts In Phase Amp Range Illustration
62(c)M21H
62(c)M23H
62(c)M43H		 230
230
400		 1
3
3		 .25 - .4
.16 - .25
.1 - .16		 A
B
B

CHART I

  • 230V, 1 phase includes cord, plug & starter
  • 230/400V, 3 phase wiring to starter by others
  • Wiring between motor & starter provided when
    ordered together
  • 50 Hz
Part Number In Volts In Phase Amp Range Illustration
62(c)M21T
62(c)M23T
62(c)M43T		 230
230
400		 1
3
3		 1.6 - 2.5
1.0 - 1.6
.63 - 1.0		 A
B
B
(c) = Electrical Configuration
F = CE French
G = CE German
U = CE Great Britain
Note: When buying a chassis mount control, the customer must
provide wiring that complies with Ce Safety Directives.

CHART L

 
  • 230/460V, 3 phase wiring to starter by others
  • Wiring between motor & starter provided when
    ordered together
  • 60 Hz
Part Number In Volts In Phase Amp Range Illustration
62MM23L
62MM43L		 230
460		 3
3		 1.0 - 1.6
.4 - .63		 B
B

 

CHART M

 
  • 230/460V, 3 phase wiring to starter by others
  • Wiring between motor & starter provided when
    ordered together
  • 60 Hz
Part Number In Volts In Phase Amp Range Illustration
62MM23M
62MM43M		 208-230
460		 3
3		 1.6 - 2.5
1.0 - 1.6		 B
B

Notes:

  • 8” (203 ) and wider conveyors with light load drives should be limited to 8’ (2,438) long.
  • FLA = Full Load Amperes
  • Some motors & gear reducers may normally operate hot to the touch. Consult factory for specific operating temperatures.

 

Back to top