3200 Series Conveyors From Dorner Mfg. Corp.

Adjustable Lane Guiding
	Features/ Benefits • Compatible with standard Dorner bolt-on profiles. • Easily adjusts for quick product change over. • Attach additional guides to create multiple lanes. • Create lanes, plows, merges, and transfers.
	Specifications • UHMW guide surface on an anodized aluminum mounting rail. • Painted Steel mounting hardware. • Available in standard 1’ (305mm) increments or can be ordered to any length. • 5” (127mm) maximum, 0.25” (7mm) minimum part height. • 0.25” (6mm) minimum lane width. • Package includes (1) lane guide, mounting hardware and adjusting knobs. • For conveyors up to 24” (610mm) wide. Consult factory for wider lane guide availability. • Metric fasteners only. Important: Exceeding 5” (127) product height will produce a pinch point.

Adjustable Lane Guiding

Features/ Benefits
• Compatible with standard Dorner bolt-on profiles.
• Easily adjusts for quick product change over.
• Attach additional guides to create multiple lanes.
• Create lanes, plows, merges, and transfers.

Specifications

• UHMW guide surface on an anodized aluminum mounting rail.
• Painted Steel mounting hardware.
• Available in standard 1’ (305mm) increments or can be ordered to any length.
• 5” (127mm) maximum, 0.25” (7mm) minimum part height.
• 0.25” (6mm) minimum lane width.
• Package includes (1) lane guide, mounting hardware and adjusting knobs.
• For conveyors up to 24” (610mm) wide. Consult factory for wider lane guide availability.
• Metric fasteners only.

Important: Exceeding 5” (127) product height will produce a pinch point.

Pulley Transfer Plate
	Specifications • 1.25” (32mm) Diameter minimum product transfer for 3200 Series • Hard coat anodized finish • Package includes extruded aluminum transfer plate, required pulley tail plates and mounting hardware. • Metric fasteners only.
* Not compatible with clipper splice.	Note: To order a transfer tail on a conveyor assembly, consult factory. Important: Do not use with 03, 08, 55, 62 or 64 High Friction Belts or Clipper Splice

Pulley Transfer Plate

Specifications
• 1.25” (32mm) Diameter minimum product transfer for 3200 Series
• Hard coat anodized finish
• Package includes extruded aluminum transfer plate, required
pulley tail plates and mounting hardware.
• Metric fasteners only.

* Not compatible with clipper splice.

Note: To order a transfer tail on a conveyor assembly, consult factory.
Important: Do not use with 03, 08, 55, 62 or 64 High Friction Belts or Clipper Splice

90° Adjustable Transfer
	Features/ Benefits: • Pre-engineered guided turns adjust to a variety of products. • Accepts standard Dorner bolt-on profiles outside of transfer area. • Place adjusting rods where required. • Easily adjusts for quick product change-over. • Metric fasteners only. Specifications • For conveyors up to 12” (305mm) wide. • Requires low side conveyors. • 0.25” (6mm) minimum part thickness. • Hard coat anodized transfer plate. • Painted Steel mounting hardware. • 48” (1,219mm) long UHMW outside turn guide, customer can trim to fit. • Maximum recommended part weight is 20 lbs. (9Kg) at 50 ft/min. (15 M/min.) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds. • 0.88” (22mm) minimum product size for 2200 Series • Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.
Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user. Important: Do not use with 03, 08, 55, 62, or 64 High Friction Belts on Infeed conveyor

90° Adjustable Transfer

Features/ Benefits:
• Pre-engineered guided turns adjust to a variety of products.
• Accepts standard Dorner bolt-on profiles outside of transfer area.
• Place adjusting rods where required.
• Easily adjusts for quick product change-over.
• Metric fasteners only.

Specifications
• For conveyors up to 12” (305mm) wide.
• Requires low side conveyors.
• 0.25” (6mm) minimum part thickness.
• Hard coat anodized transfer plate.
• Painted Steel mounting hardware.
• 48” (1,219mm) long UHMW outside turn guide, customer can trim to fit.
• Maximum recommended part weight is 20 lbs. (9Kg) at 50 ft/min.
(15 M/min.) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds.
• 0.88” (22mm) minimum product size for 2200 Series
• Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.

Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user.

Important: Do not use with 03, 08, 55, 62, or 64 High Friction Belts on Infeed conveyor

Hardware Accessories

Spring T-nut
	• Mounts in T-slots to attach light weight accessories. • Recommended for vertical aluminum stand T-slots.
	Part Number	Description
	200124 200124M 200300 200300M	Spring T-nut, .25-20 Spring T-nut, M6-1.0 (5) Spring T-nuts, .25-20 (5) Spring T-nuts, M6-1.0

T-Slot Extenders
	• Provides additional T-slots to the end of conveyor. • Includes mounting brackets and hardware. • Metric fasteners.
	Part Number	Description
	307000M	T-Slot Extender, Pair

3200 Series T-Bars
	• Mounts in T-slots to attach heavy accessories. • 2.63” (67) long 2 hole model, .75” (19) 1 hole model.
	Part Number	Description
	639971 639971M 300150 300150M	1 hole T-bar, .25-20 1 hole T-bar, M6-1.0 2 hole T-bar, .25-20 2 hole T-bar, M6-1.0

T-Slot Cover
	• Snaps into conveyor and aluminum stand T-slots. • Black plastic extrusion. • Can be trimmed to fit.
	Part Number	Description
	645656P	T-Slot Cover, Per 1’ (305) of length

Side Guides
	• Provides a 6” or 12” wide working surface • Adjusts in/out and up/down (.25” max above bedplate) for product transfer on/off conveyor belts • Can be positioned anywhere along the conveyor • Anodized aluminum work surface • Max load: 5 lbs./Ft (6 Kg/M), use Adjustable Tie Brackets for added capacity • Available in 1’ (305) increments from 1’ (305) to 99’ (30,175) • Compatible with 2200, LPZ, MPB & 3200 Series Conveyors

Side Guides

• Provides a 6” or 12” wide working surface
• Adjusts in/out and up/down (.25” max above bedplate)
for product transfer on/off conveyor belts
• Can be positioned anywhere along the conveyor
• Anodized aluminum work surface
• Max load: 5 lbs./Ft (6 Kg/M), use Adjustable Tie Brackets for added capacity
• Available in 1’ (305) increments from 1’ (305) to 99’ (30,175)
• Compatible with 2200, LPZ, MPB & 3200 Series Conveyors

Side Guides

Flared Side Guide
	• Guides parts onto conveyor belt surface. • Includes metric mounting hardware.
	Part Number	Description
	280802M 280803M 280804M 280805M 280806M	2’ (610) Flared Side 3’ (914) Flared Side 4’ (1219) Flared Side 5’ (1524) Flared Side 6’ (1829)Flared Side

Stops

Adjustable Stop
	• Slides up and down T-slot length. • Includes metric mounting hardware
	Part Number	Description
	3076WWM	Adjustable Stop

Adjustable Stop
	• Includes metric mounting hardware
	Part Number	Description
	3255WWM	3200 End Stop

WW = Conveyor Width Reference

Brackets

Table Top Mounting Bracket
	• Includes metric mounting hardware
	Part Number	Description
	200349M	Table top bracket

Note: If the discharge end of conveyor is
mounted over a table or similar structure,a
conveyor bottom wiper must be installed to
prevent against possible pinch point. Order
bottom wiper separately.

Frame Mount Casters
	• Includes metric mounting hardware
	Part Number	Description
	390207	Frame mount casters, pair.

Floor Mount Brackets
	• Includes metric mounting hardware
	Part Number	Description
	390217	Floor mount brackets, pair.

Due to the wide variety of possible conveyor setups, adaption of the supplied guarding material is the responsibility of the end user.

3200 SERIES CONVEYORS: Accessories

Adjustable Lane Guiding

Pulley Transfer Plate

90° Adjustable Transfer

Hardware Accessories

Side Guides

Side Guides

Stops

Brackets