Contact
Form 3200 SERIES CONVEYORS: Flat Belt Center Drive
Specifications:
- Load up to 1000 lbs.* (455 Kg)
- Belt Speeds up to 368 ft/min. (112 M/min)
- Belt widths: 3.75” (95) to 48” (1219)
- Conveyor lengths: 4’ (1,219) to 99’ (30,175)
- 16” (406) of belt take-up
- 6” (152) diameter drive pulley turns approximately, 18.8” (479) of belt per revolution
- Metric fasteners
-
models available - Reversing reduces load capacity by 33%
- Order Gearmotor seperately
Features/Benefits:
- Quick 15 minute belt change - NEW!
- Center Drive module frees up both ends of conveyor for operator and machine interface
- The Center Drive Module can be easily repositioned along the length of the conveyor
- Maintenance free pneumatic belt tensioner maintains uniform belt tension (Manual spring tension available)
- Steel nitrite coated head plates eliminate painted end surfaces
- V-groove bedplate with guided belt provides positive belt tracking, even under demanding side load applications
- Non V-guided belts use our patented belt tracking cams, offering you the widest belt selection possible
- Strong, box-like construction resists damaging frame twists
- 16” of belt take-up extends conveyor belt life
- Stand mounting brackets and return belt rollers are easily re-positioned along the frame
- Special length conveyors to .12” (3) increments at standard price and delivery
- Special width conveyors to 2” (51) increments at standard price and delivery
Optional Interface Tail Section
- Sealed bearing
- 1” (25) diameter rollers
- Widths up to 48” (1219)
- Available at both ends to
assist in small part transfers
| STANDARD SIZES | ||||
|---|---|---|---|---|
| Conveyor Width Reference | 04 | 06 | 02 increments up to... | 48 |
| Conveyor Belt Width (W) | 3.75” (95) |
6” (152) |
2” (51) increments up to... | 48” (1,219) |
| Conveyor Length Reference | 0400 | 0001 increments up to... | 9900 | |
| Conveyor Length (L) | 4’ (1,219) | .12” (3) increments up to... | 99’ (30,175) | |
Notes:
-
Conveyors wider than 40” (1,016) require V-Guide belt tracking.
-
Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
-
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
-
Dimensions are represented in inches, feet, and (millimeters).
-
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
-
Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.