Contact
Form 3200 SERIES CONVEYORS: Flat Belt End Drive
Specifications:
- Load up to 400 lbs.* (181 Kg)
- Belt Speeds up to 421 ft/min. (128 M/min)
- Belt widths: 3.75” (95) to 48” (1,219)
- Conveyor lengths: 3’ (914) to 40’ (12,192)
- 1.62” (41) of belt take-up on conveyors up tor 20’ long
- 3.24” (82) of belt take-up on conveyors over 20’ long
- 3” (76) diameter drive pulley turns
approximately 9.7” (246) of belt per revolution - Metric fasteners
models available
Features/Benefits:
- Quick 5 minute belt change
- Rack and pinion belt tensioning for fast, accurate single point belt tensioning
- Steel nitrite coated head plates eliminate painted surfaces
- V-groove bed plate with guided belt provides positive belt tracking, even under demanding side load applications
- Belt take-up indicator allows for quick reading of remaining belt life
- Strong, box-like construction resists damaging frame twist
- Stand mounting brackets and return belt rollers are easily re-positioned along the frame
- Special length conveyors to .12” (3) increments at standard price and delivery
- Special width conveyors to 2” (51) increments at standard price and delivery
Optional Interface Tail Section
- Sealed bearing
- 1” (25) diameter rollers
- Widths up to 48” (1219)
- Available at non-driven end
to assist in small part transfers
Rack and Pinion
belt tensioning design
allows the tail section to be easily
slid back for quick belt removal.
Change Belts in Less than 5 Minutes! |
||
 |
 |
 |
Loosen fasteners and |
Remove old belt and replace. |
Adjust tension on new belt, |
| STANDARD SIZES | ||||
|---|---|---|---|---|
| Conveyor Width Reference | 04 | 06 | 02 increments up to... | 48 |
| Conveyor Belt Width (W) | 3.75” (95) |
6” (152) |
2” (51) increments up to... | 48” (1,219) |
| Conveyor Length Reference | 0300 | 0001 increments up to... | 4000 | |
| Conveyor Length (L) | 3’ (914) | .12” (3) increments up to.... | 40’ (12,192) | |
Notes:
- Conveyors wider than 40” (1,016) require V-Guide belt tracking.
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors.
-
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
- Dimensions are represented in inches, feet, and (millimeters).
- Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
- Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.