Contact Form 4100 SERIES CONVEYORS: Flat Belt End Drive
Specifications:
- .75” (19) minimum, 12” (305) maximum belt widths
- 2’ (610) minimum, 6’ (1,829) maximum conveyor lengths
- 12 - gauge roll formed steel frame
- 1.5” (38) bottom of frame to top of belt
- The 1” (25) diameter drive pulley turns approximately 3.4” (86) of belt per revolution
- Load capacity up to 80 lbs.* (36kg)
- Belt speeds to 255 ft./min. (78 M/min.)
- SAE fasteners only, metric fasteners not available on the conveyor
- Do not index or reverse .75” (19) and 1.75” (44) wide conveyors
Features/Benefits:
- Mild steel 1-piece frame with .25” (6) thick bed plate for strength and durability
- Durable baked enamel finish
- Low maintenance fixed pulley centers with no belt tracking requirements
- Magnetic models available
- Wide variety of profiles and accessories
- Durable .25” (6) thick bottom wiper removes debris from belt
- Belt type and materials to match application requirements
Applications:
- Metal Forming, Stamping
- Machined Part Handling
Change Belts in Less than 5 Minutes! |
||
 |
 |
 |
Loosen fasteners and |
Remove old belt and replace. |
Adjust tension on new belt, |
| STANDARD SIZES | |||||||
|---|---|---|---|---|---|---|---|
| Conveyor Width Reference | 01 | 02 | 03 | 04 | 06 | 08 | 12 |
| Conveyor Belt Width (W) | .75” (19) |
1.75” (44) |
2.75” (70) |
3.75” (95) |
6” (152) |
8” (203) |
12” (305) |
| Conveyor Length Reference | 02 | 01 increments up to... | 06 | ||||
| Conveyor Length (L) | 2’ (610) | 1' increments up to... | 6’ (1,829) | ||||
Notes:
- 4100 Gearmotor mounting packages are available with metric fasteners only
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
- Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
- Dimensions are represented in inches, feet, and (millimeters).
- Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.