5200 Series Conveyors From Dorner Mfg. Corp.

Photo Eye Kits

24V DC Retro Reflective Sensor
QWIK disconnect plug
Includes reflector and mounting
Fully adjustable mount for
2200/3200/5200 Series conveyors
2” and 5” adjustment height ranges

Part No	Description
75M-PE-1 75M-PE-2	2” height adjustment 5” height adjustment

Photo Eye Bracket Kits

Standard mounting for 18mm barrel/nose mount photo-eyes
Reflective version includes reflector
Through beam mount version
Fully adjustable mount for 2200/3200/5200 Series conveyors
2” and 5” adjustment height ranges

Part No	Photo Eye Mount Type	Adjustment Height
75M-PM-1 75M-PM-2 75M-PM-3 75M-PM-4 75M-PM-5 75M-PM-6	Reflective Reflective Through Beam Through Beam Convergence Convergence	2” 5” 2” 5” 2” 5”

Electrical Conduit Mounts

Includes mount and hardware
Mounts to QWIK-Slot, no T-nut required
Package of 10 pieces

Part Number	Description
350001	Conduit Mount, 1/2” EMT, Package of 10
350002	Conduit Mount, 1” EMT, Package of 10

Low Voltage Wire Mounts and Ties

Includes mount, hardware and tie wrap
Mounts to QWIK-Slot, no T-nut required
Package of 10 pieces

Part Number	Description
350000	Wire Tie Kit, Package of 10

Adjustable Lane Guiding

Features and Benefits:

Compatible with standard Dorner
bolt-on profiles
Easily adjusts for quick product change over
Attach additional guides to create
multiple lanes
Create lanes, plows, merges and transfers

Specifications

UHMW guide surface on an anodized aluminum mounting rail
Painted steel mounting hardware
Available in standard 1’ (305 mm) increments or can be ordered to any length
5” (127 mm) maximum, 0.25” (7 mm) minimum part height
0.25” (6 mm) minimum lane width
Package includes one lane guide, mounting hardware and adjusting knobs
For conveyors up to 24” (610 mm) wide (consult factory for wider lane guide availability)
Metric fasteners only

Important: Exceeding
5” (127 mm) product
height will produce a
pinch point.

90˚ Adjustable Transfer

	Features and Benefits:
	Pre-engineered guided turns adjust to a variety of products Accepts standard Dorner bolt-on profiles outside of transfer area Place adjusting rods where required Easily adjusts for quick product change-over Metric fasteners only
	Specifications
	For conveyors up to 12” (305 mm) wide Requires low side conveyors 0.25” (6 mm) minimum part thickness Hard coat anodized transfer plate Painted Steel mounting hardware 48” (1,219 mm) long UHMW outside turn guide, customer can trim to fit Maximum recommended part weight is 20 lbs. (9 kg) at 50 ft/min. (15 m/min.) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds. 1.25” (32 mm) minimum product size for 5200 Series Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate
	Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user.

Hardware Accessories

Spring T-nut

Mounts in T-slots to attach light weight accessories
Recommended for vertical aluminum stand T-slots

Part Number	Description
200124 200124M 200300 200300M	Spring T-nut, .25-20 Spring T-nut, M6-1.0 Package of 5 Spring T-nuts, .25-20 Package of 5 Spring T-nuts, M6-1.0

T-Slot Extenders

Provides additional T-slots to the end of conveyor
Includes mounting brackets and hardware
Metric fasteners

Part Number	Description
307000M	T-Slot Extender, Pair

3200 & LPZ Series T-Bars

Mounts in T-slots to attach heavy accessories
2.63” (67) long 2 hole model, .75” (19) 1 hole model

Part Number	Description
639971 639971M 300150 300150M	1 hole T-bar, .25-20 1 hole T-bar, M6-1.0 2 hole T-bar, .25-20 2 hole T-bar, M6-1.0

T-Slot Cover

Snaps into conveyor and aluminum stand T-slots
Black plastic extrusion
Can be trimmed to fit

Part Number	Description
350073	T-Slot Cover, Per 1’ (305) of length

Side Tables

Provides a 6” or 12” wide working surface
Adjusts in/out and up/down (.25” max above bedplate)
for product transfer on/off conveyor belts
Can be positioned anywhere along the conveyor
Anodized aluminum work surface
Max load: 5 lbs/ft (6 kg/m), use Adjustable Tie Brackets for added capacity
Available in 1’ (305 mm) increments from 1’ (305 mm) to 99’ (30,175 mm)
Compatible with 2200/3200/5200 Series Conveyors

Side Guides

• Guides parts onto conveyor belt surface
• Includes metric mounting hardware

Part Number	Description
280802M 280803M 280804M 280805M 280806M	2’ (610 mm) Flared Side 3’ (914 mm) Flared Side 4’ (1219 mm) Flared Side 5’ (1524 mm) Flared Side 6’ (1829 mm) Flared Side

Stops

Adjustable Stop

• Slides up and down T-slot length
• Includes metric mounting hardware

Part Number	Description
352068-WW	Adjustable stop for straight
352069-WW	Adjustable stop for curve

Brackets

Frame Mount Casters

• Includes metric mounting hardware

Part Number	Description
390207	Frame mount casters, pair

Floor Mount Brackets

• Includes metric mounting hardware

Part Number	Description
390217	Floor mount brackets, pair

Note: If the discharge end of conveyor is
mounted over a table or similar structure,a
conveyor bottom wiper must be installed to
prevent against possible pinch point. Order
bottom wiper separately.

WW = Conveyor Width Reference

5200 SERIES CONVEYORS: Accessories