Contact Form 6200 SERIES CONVEYORS: Flat Belt End Drive
Specifications:
- 11 gauge stainless steel roll formed frame
- Sealed bearings
- Belt widths: 1.75” (44) to 12” (305 MM)
- Conveyor Lengths: 2’ (610) to 12’ (3,658 MM)
- 1.5” (38) bottom of frame to top of belt
- 12mm diameter integral drive shaft
- The 1” (25) diameter drive pulley turns approximately
3.4” (86) of belt per revolution - Load capacity up to 80 Lbs* (36 Kg)
- Belt speeds up to 255 ft/min. (78 M/min.)
- Metric fasteners
- Mild steel head and tail plates with black nitrite finish
- Motion sensor switch ready
models available
Features/Benefits:
- Wedge-Lok system for impact protection
- Streamlined design fits where other conveyors do not
- Quick 5 minute belt change for increased uptime
- Low maintenance sealed bearings in both head and tail pulleys
- Lengths in .12” (4) increments
- Belt materials to match application requirements
- Quick clamp rail for easy mounting of bolt-on accessories
- Rack and pinion design offers fast single point belt tensioning
- V-Groove frame with guided belt ensures accurate tracking
- Durable .25” (6) thick bottom wiper
- Optional spindles for “gang drive” applications
- Magnetic models available
Optional Gang Drive Pulleys
Wedge-Lok™ System
What is it? The Conveyor headplates, which retain the conveyor pulleys and belt tension racks, are slightly tapered.
What is the Advantage? In harsh or frequently changing production environments, equipment can be damaged as it is quickly moved to different applications. Dorner’s patented Wedge-Lok™ System protects the conveyor end from damage by locking the pulley end from movement on sharp impact.
Change Belts in Less than 5 Minutes! |
||
 |
 |
 |
Loosen fasteners and |
Remove old belt and replace. |
Adjust tension on new belt, |
| STANDARD SIZES | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Conveyor Width Reference | 02 | 03 | 04 | 05 | 06 | 08 | 10 | 12 | |
| Conveyor Belt Width (W) | 1.75” (44) |
2.75” (70) |
3.75” (95) |
5” (127) |
6” (152) |
8” (203) |
10” (254) |
12” (305 MM) |
|
| Conveyor Length Reference | 0200 | 0001 increments up to... | 1200 | ||||||
| Conveyor Length (L) | 2’ (610) | .12” (3) increments up to... | 12’ (3,658 MM) | ||||||
Note: Lengths 13’ to 18’ available in widths 6” to 18” only.
Gang Drive Conveyors: Non-V-Guided belts up to 24” (610) wide, V-Guided belts up to 18” (457) wide
Gang Drive Conveyors: Non-V-Guided belts up to 24” (610) wide, V-Guided belts up to 18” (457) wide
Notes:
- Gang Drive tail pulley requires periodic greasing.
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
- Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
- Dimensions are represented in inches, feet, and (millimeters).
- Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
- Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.