Home About Dorner Contact Us Distributors Tradeshows Site Map

 
Dorner Performance Newsletter


 

DORNER MFG. CORP.
975 Cottonwood Ave
P.O. Box 20
Hartland, WI 53029 USA

INSIDE THE USA
TEL: 800.397.8664
FAX: 800.369.2440

OUTSIDE THE USA
TEL: 262.367.7600
FAX: 262.367.5827

Home > Standard Products > 7400 ULTIMATE Series > Flat Belt End Drive

7400 ULTIMATE SERIES CONVEYORS: Support Stands



Support Stand Quantity Charts

7400 Ultimate Straight Conveyors
• See table below for Stand Requirements

Straight Conveyors
Conveyor
Length		 Number
of
Supports
20” (0.5M) - 30” (0.8M)
31” (0.8M) - 132” (3.4M)
133” (3.4M) - 252” (6.4M)
253” (6.4M) - 372” (9.4M)
373” (9.5M) - 492” (12.5M)
493” (12.5M) - 612” (15.5M)
613” (15.6M) - 732” (18.6M)
733” (18.6M) - 852” (21.6M)
853” (21.7M) - 972” (24.7M)
973” (24.7M) - 999” (25.4M)
1
2
3
4
5
6
7
8
9
10


7400 Ultimate Curved Conveyors
• Straight modules must have stands near ends and at frame section junctions
• See table below for Curve Modules Stand Requirements

Curve Modules Stand Requirements
 
8" 10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36"
15 n/a n/a 0 0 0 0 0 0 0 0 0 0 0 0 0
30 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
45 n/a n/a 0 0 0 0 0 0 0 0 0 0 0 0 0
60 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
75 n/a n/a 1 1 1 1 1 1 1 1 1 1 1 1 1
90 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1
105 n/a n/a 1 1 1 1 1 1 1 2 2 2 2 2 2
120 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2
135 n/a n/a 2 2 2 2 2 2 2 2 2 2 2 2 2
150 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3
165 n/a n/a 3 3 3 3 3 3 3 3 3 3 3 3 3
180 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3


Support Stands

  • Horizontal Mount Version for direct conveyor mounting, conveyor must be level (Mount directly to conveyor).
  • Foot self-aligns 10º for sloped floors.
  • +/- 1 3/8” height adjustment.
  • All components are stainless steel brushed to #4 finish.
  • Metric fasteners.
  • Incline Mount Version for angled conveyor applications.
  • Sanitary Support Stands do not require mounting brackets.

Straight Conveyor Fixed Foot Model
Conveyor Width 6
(152) 		8
(203) 		10
(254) 		12
(305) 		14
(356)		 2" (25) increments
up to... 		36
(914)
WW Part# Reference 06 08 10 12 14 02 increments up to... 36
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.4
(467)		 2" (25) increments
up to...		 40.4
(1026)
Top of Belt Height 22
(559)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 22 0101 increments up to... 72
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.5
(470)		 2" (25) increments
up to... 		40.5
(1029)
Top of Belt Height 22
(559)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 22 0101 increments up to... 72

Straight Conveyor Swivel Locking Casters Model*
Conveyor Width 6
(152) 		8
(203) 		10
(254) 		12
(305) 		14 (356) 2" (25) increments
up to... 		36
(914)
WW Part# Reference 06 08 10 12 14 02 increments up to... 36
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.4
(467)		 2" (25) increments
up to...		 40.4
(1026)
Top of Belt Height 28
(711)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 2428 0101 increments up to... 72
Stand Width 18.3
(465)		 20.3
(517)		 22.3
(566)		 24.3
(617)		 18.5
(470)		 2" (25) increments
up to... 		40.5
(1029)
Top of Belt Height 28
(711)		 1” (25) increments up to... 72
(1829)
HH Part# Reference 28 0101 increments up to... 72
Note: HH is to Conveyor Top of Belt
*Note: Some caster model support stands are equipped with integrated outriggers. Contact factory for details.


SANITARY FLOOR ANCHOR KITS


Type 1 Sanitary Floor
Anchor Kit

 

  • 3/8” (10mm) x 1.57” (40mm) Drop In.
  • Stainless Steel.
  • Anchor is flush with floor upon removal of bolt.
  • Two (2) per anchor kit.


Part No. FAS-1


Type 2 Sanitary Floor
Anchor Kit

 

  • 3/8” (10mm) x 2 3/4” (70mm).
  • Stainless Steel.
  • Threaded anchor bolt protrudes above floor after installation.
  • Two (2) per anchor kit.


Part No. FAS-2

 

 

Back to top