Sanitary Conveyor - AquaPruf 7600 Series Conveyors From Dorner Mfg. Corp.

Specifications:

Belt widths: 12” (305mm), 18” (457mm),
24” (610mm) & 36” (914mm)
Curve Angles 45, 90 & 180 degrees
Load: up to 150 lbs. (68 kg)
Belt speed: up to 173 ft/min (53m/min) at curve centerline
Continuous TIG Welded 304 Stainless Steel Frame
#4 polish on all outside surfaces
Bearing material is 400 stainless steel with H1 type FDA lubricant
Stainless steel rod wearstrip bedplate
5” (127mm) diameter pinch roller drive with cast-on urethane lagging
5/8” (16mm) diameter nose bar transfer rollers at conveyor ends
FDA Approved belting and plastic components

Features/Benefits:

Frame is constructed of continuous TIG welded 304 stainless steel and is designed with minimal horizontal surfaces for optimum cleaning.
Tool-Less quick release belt tension devices for quick effective sanitation.
Stainless Steel multiple rod bedplate to eliminate conveyor belt sticking in wet applications.
Pinch roller belt drive system operates at minimal belt tension for long nose bar bearing life.
All rollers including the pinch roller drive operate outside the food zone to ensure non-contamination of the belt surface.
Solid Ertalyte 5/8” diameter nosebars for transfering small products.
Bearings are designed for low pressure (100 psi max) soap and water cleaning cycles.
Durable white FDA approved urethane belts.

BISSC Certified

The bearings are engineered for tough conditions, 24/7 operations, full rated load, full rated speed, and once per day cleaning with Low Pressure (100 psi max) soap and water. When the conveyors are properly applied and maintained the bearings will provide a minimum of 1 year of service.

5/8” Nose Bar
for small product transfer.

STANDARD SIZES
Conveyor Width Reference	12	18		24	36
Conveyor Belt Width (W)	12” (305)	18” (457)		24” (610)	36” (914)
Conveyor Angle Reference	45		90		180
Conveyor Angle	45 degrees		90 degrees		180 degrees

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.

Curved Flat Drive Model

DIMENSIONS	45 Degree Corner		90 Degree Corner		180 Degree Corner
Belt Width	Outside Radius	Inside Radius	Outside Radius	Inside Radius	Outside Radius	Inside Radius
12” (305mm)	36” (914mm)	23” (584mm)	24” (610mm)	11” (279mm)	24” (610mm)	11” (279mm)
18” (457mm)	48” (1219mm)	29” (737mm)	36” (914mm)	17” (432mm)	36” (914mm)	17” (432mm)
24” (610mm)	48” (1219mm)	23” (584mm)	48” (1219mm)	23” (584mm)	48” (1219mm)	23” (584mm)
36” (914mm)	62” (1575mm)	25” (635mm)	62” (1575mm)	25” (635mm)	62” (1575mm)	25” (635mm)

Available Pre-Engineered Options
Stainless Rod Bed Plate reduces belt sticking in wet applications.	Nose Bar Pulleys are ½”, 1”, & 1 7/8” diameter for tight transfers.	Quick Release Belt Tension Systems for easy cleaning.
Pinch Roller Drive ensures no contamination of the belt in the food zone.

Available Pre-Engineered Options

Stainless Rod Bed Plate
reduces belt sticking
in wet applications.

Nose Bar Pulley

Nose Bar Pulleys
are ½”, 1”, & 1 7/8” diameter
for tight transfers.

Quick Release
Belt Tension Systems
for easy cleaning.

Pinch Roller Drive
ensures no contamination
of the belt in the food zone.

Part Number Reference

Notes:

Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
Dimensions are represented in inches, feet, and (millimeters).
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.

7600 SERIES CONVEYORS: Curved Flat Belt

Specifications:

Features/Benefits: