Specifications:
- Belt Widths – 6” to 60” (152mm to 1524mm)
- Lengths 48” (1219mm) to 40’ (12.2m)
- Loads up to 20 lbs. per square foot of belt (90 Kg/m2 )
- Belt Speed: 328 ft/min Maximum (100 meters/min)
- Continuous TIG Welded 304 stainless steel frame
- #4 Polish on all outside Surfaces
- Bearing material is 400 stainless steel
- Bearing lubricant is H1 type FDA lubricant
- 3.5” (88.9mm) diameter drive roller with cast-on Urethane lagging
- UHMW Wear strip bed plate
- FDA Approved belting and plastic components
Features/Benefits:
- Frame is constructed of continuous TIG welded 304 stainless steel and is designed with no horizontal surfaces for optimum
cleaning. Conveyors over 10’ (3048mm) consist of multiple sections which are bolted together.
- All bearings are 400 stainless steel, filled with H1 FDA lubricant and mounted in cast stainless steel housings for maximum
performance in washdown environments.
- Solid bed plate (optional) is stainless steel and locates on UHMW strips for delicate / fragile products.
- Belt tensioning mechanism is constructed of 304 stainless steel and uses Acme threads for easy cleaning. Externally mounted to
the frame with adequate clearances for cleaning.
- Conveyor is designed to withstand high pressure (100-1500 PSI) spray and chlorinated solutions.
- Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
- Return Belt Supports are 4” UHMW Rollers and are easily removed without tools for effective cleaning.
- Center drive roller is 3 ½” diameter stainless steel with Cast-On Urethane Lagging for increased load capacity.
- The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
- Nose bar idler ends (optional) are available in ½”, 1”, & 1 7/8” for small product transfers.
- Center Drives allow additional clearance on ends when needed. Unique tool-less construction for guarding and back bend rollers.
- Belt lifters (optional) lift belt from wear strips/bed plate by simply pulling an external lever for fast access and effective cleaning.
- Belt scraper (optional) removes build up and adjusts easily for each application. Features tool-less dis-assembly/assembly for
cleaning of parts.
Tool-less Quick
Removal Pulleys
| STANDARD SIZES |
| Conveyor Width Reference |
06 |
02 increments up to... |
60 |
| Conveyor Belt Width (W) |
6” (152mm) |
2” (51mm) increments up to... |
60” (1524mm) |
| Conveyor Length Reference |
048 |
001 increments up to... |
480 |
| Conveyor Length (L) |
48” (1219mm) |
1” (25mm) increments up to... |
480” (12.2M) |
Note: Proper cleaning and sanitation is the responsibility of the end-user.
| Center Drive Model |
 |
| Available Pre-Engineered Options |
Nose Bar Pulleys
are ½”, 1”, & 1 7/8” diameter
for tight transfers. |
Belt Lifters
for easy cleaning on
wide or long conveyors. |
Belt Scraper
UHMW blade removes
build-up & is easily adjusted. |
| Nose Bar Pulley Application |
| Market |
½” |
1” |
1-7/8” |
Medical
Pharmaceutical
Personal Care
Bakery
Confectionery
Snack Foods
Ready-To-Eat
Meat/Fish/Poultry
Dairy
|
x
x
x
x |
x
x
x
x
x
x |
x
x
x
x
x
x
x
x
x |
|
Frame Cut-Out
allows access for internal
frame washing.
|
Bed Plates
provide continuous support
for delicate product.
(dry applications only) |
Part Number Reference
*Stand location may be dependent upon conveyor length
**Infeed scrapers available as a special capability.
***Additional tail configurations are available as a special capability.
Notes:
-
Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See
Performance Charts / Data for details.
-
-
Dimensions are represented in inches, feet, and (millimeters).
-
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
Contact
Form 
