7600 SERIES CONVEYORS: Support Stands
| Support Stand Quantity Charts |
Straight Conveyor Support Stands
- Horizontal Mount Version for direct conveyor mounting, conveyor must be level (Mount directly to conveyor).
- Foot self-aligns 10º for sloped floors.
- +/- 2” height adjustment.
- All components are stainless steel brushed to #4 finish.
- Metric fasteners.
- Incline Mount Version for angled conveyor applications.
- Sanitary Support Stands do not require mounting brackets.
|
| SUPPORT STAND QUANTITY CHART |
7600 Series Straight Conveyors |
| Conveyor Length |
Number of Supports |
36” (0.8M) - 132” (3.4M)
133” (3.4M) - 252” (6.4M)
253” (6.4M) - 372” (9.4M)
373” (9.5M) - 480” (12.2M) |
2
3
4
5 |
|
| Straight Conveyor Support Stands |
|
Note: HH is to Conveyor Top of Belt
*Note: Some caster model support stands are equipped with integrated outriggers. Contact factory for details.
|
Part Number Reference
*Stands equipped with casters accept diagonal bracing.
| Quick Release Support Stands |
• Fast belt removal with No Tools Required
• No more removing stands to change belts
• Require the use of the two (2 per stand) included
Type 1 Sanitary Floor Anchors (See bottom of page for details)
|
Straight Conveyor Foot Model Quick Release Stands |
| Conveyor Width |
6
(152) |
8
(203) |
10
(254) |
12
(305) |
14
(356) |
2" (25) increments
up to... |
36
(914) |
| WW Part# Reference |
06 |
08 |
10 |
12 |
14 |
02 increments
up to... |
36 |
 |
Stand Width |
12.6
(320) |
14.6
(371) |
16.6
(422) |
18.6
(472) |
18.43
(468) |
2" (25) increments
up to... |
40.43
(1027) |
| Top of Belt Height |
19-23
(483-584) |
1” (25) increments
up to... |
70-74
(1778-1880) |
| HH Part# Reference |
1923 |
0101 increments up to... |
7074 |
Note: HH is to Conveyor Top of Belt
The Quick Release Stands require the use of Floor Anchors (See bottom of page)
|
| Curve Conveyor Support Stands |
|
SUPPORT STAND QUANTITY CHART |
7600 Curve Modules Stand Requirements |
| |
Belt Width |
| 12” |
18” |
24” |
36” |
 |
45 |
2 |
2 |
2 |
2 |
| 90 |
2 |
2 |
2 |
2 |
| 180 |
3 |
3 |
3 |
3 |
Curve Conveyor Fixed Foot Model |
| Conveyor Width |
12 (305) |
18 (457) |
24 (610) |
36 (914) |
| WW Part# Reference |
12 |
18 |
24 |
36 |
 |
Short Stand Width |
24.5 (622) |
30.5 (775) |
36.5 (927) |
48.5 (1232) |
| Tall Stand Width |
30.22 (768) |
36.22 (920) |
42.22 (1072) |
54.22 (1377) |
| Top of Belt Height |
20-24
(508-610) |
23-27
(584-686) |
26-30
(660-762) |
1” (25) increments up to... |
70-74
(1778-1880) |
| HH Part# Reference |
2024 |
2327 |
2630 |
0101 increments up to... |
7074 |
Note: HH is to Conveyor Top of Belt
|
| SANITARY FLOOR ANCHOR KITS |
|
|
Type 1 Sanitary Floor Anchor Kit
- 3/8” (10mm) x 1.57” (40mm) Drop In
- Stainless Steel
- Anchor is flush with floor upon removal of bolt.
- Two (2) per anchor kit.
Part No. FAS-1
|
 |
Type 2 Sanitary Floor Anchor Kit
- 3/8” (10mm) x 2 3/4” (70mm)
- Stainless Steel
- Threaded anchor bolt protrudes above floor after installation.
- Two (2) per anchor kit.
Part No. FAS-2
|
Notes:
- Due to the wide variety of conveyor and stand options along with possible configurations, stability of final setup is the responsibility of the end user.
Contact
Form 
