LPZ SERIES CONVEYORS: Accessories
Adjustable Lane Guiding |
 |
 Features/ Benefits
• Compatible with standard Dorner bolt-on profiles.
• Easily adjusts for quick product change over.
• Attach additional guides to create multiple lanes.
• Create lanes, plows, merges, and transfers.
|
 |
Specifications
• UHMW guide surface on an anodized aluminum mounting rail.
• Painted Steel mounting hardware.
• Available in standard 1’ (305mm) increments or can be ordered to any length.
• 5” (127mm) maximum, 0.25” (7mm) minimum part height.
• 0.25” (6mm) minimum lane width.
• Package includes (1) lane guide, mounting hardware and adjusting knobs.
• For conveyors up to 24” (610mm) wide. Consult factory for wider lane guide availability.
• Metric fasteners only.
Important: Exceeding 5” (127) product height will produce a pinch point.
|
Pulley Transfer Plate |
 |
Specifications
• 1.25” (32mm) Diameter minimum product transfer for 3200 Series
• Hard coat anodized finish
• Package includes extruded aluminum transfer plate, required
pulley tail plates and mounting hardware.
• Metric fasteners only.
|
* Not compatible with clipper splice. |
Note: To order a transfer tail on a conveyor assembly, consult factory.
Important: Do not use with 03, 08, 55, 62 or 64 High Friction Belts or Clipper Splice
|
90° Adjustable Transfer |
 |
Features/ Benefits:
• Pre-engineered guided turns adjust to a variety of products.
• Accepts standard Dorner bolt-on profiles outside of transfer area.
• Place adjusting rods where required.
• Easily adjusts for quick product change-over.
• Metric fasteners only.
Specifications
• For conveyors up to 12” (305mm) wide.
• Requires low side conveyors.
• 0.25” (6mm) minimum part thickness.
• Hard coat anodized transfer plate.
• Painted Steel mounting hardware.
• 48” (1,219mm) long UHMW outside turn guide, customer can trim to fit.
• Maximum recommended part weight is 20 lbs. (9Kg) at 50 ft/min.
(15 M/min.) belt speed. Consult factory regarding applications for higher product weights or faster belt speeds.
• 0.88” (22mm) minimum product size for 2200 Series
• Package includes outside turn guide, guide wheel, adjustable mounting hardware and extruded aluminum transfer plate.
|
Note: Due to the wide variety of drive setups and applications point of installation guarding is the responsibility of the end user.
Important: Do not use with 03, 08, 55, 62, or 64 High Friction Belts on Infeed conveyor |
|
Hardware Accessories |
Spring T-nut |
 |
• Mounts in T-slots to attach light weight accessories.
• Recommended for vertical aluminum stand T-slots. |
| Part Number |
Description |
200124
200124M
200300
200300M |
Spring T-nut, .25-20
Spring T-nut, M6-1.0
(5) Spring T-nuts, .25-20
(5) Spring T-nuts, M6-1.0 |
|
T-Slot Extenders |
 |
• Provides additional T-slots to the
end of conveyor.
• Includes mounting brackets
and hardware.
• Metric fasteners. |
| Part Number |
Description |
| 307000M |
T-Slot Extender, Pair |
|
LPZ Series T-Bars |
 |
• Mounts in T-slots to attach heavy accessories.
• 2.63” (67) long 2 hole model, .75” (19) 1 hole model. |
| Part Number |
Description |
639971
639971M
300150
300150M |
1 hole T-bar, .25-20
1 hole T-bar, M6-1.0
2 hole T-bar, .25-20
2 hole T-bar, M6-1.0 |
|
T-Slot Cover |
 |
• Snaps into conveyor and
aluminum stand T-slots.
• Black plastic extrusion.
• Can be trimmed to fit. |
| Part Number |
Description |
| 645656P |
T-Slot Cover,
Per 1’ (305) of length |
|
Side Guides |
Flared Side Guide |
 |
• Guides parts onto conveyor belt surface.
• Includes metric mounting hardware. |
| Part Number |
Description |
280802M
280803M
280804M
280805M
280806M |
2’ (610) Flared Side
3’ (914) Flared Side
4’ (1219) Flared Side
5’ (1524) Flared Side
6’ (1829)Flared Side |
|
LPZ Chutes |
LPZ Horizontal Infeed Chute |
 |
For Standard Cleated Belt Conveyors |
| Part Number |
Description |
38M501
|
1’ (305) Infeed chute, Standard Cleated, for 2’ (610) long section |
38M502
|
2’ (610) Infeed chute, Standard Cleated, for 3’ (914) long section |
38M503
|
3’ (914) Infeed chute, Standard Cleated, for 4’ (1219) long section |
| 38M504 |
4’ (1219) Infeed chute, Standard Cleated, for 5’ (1524) long section |
| For Sidewall Cleated Belt Conveyors |
| Part Number |
Description |
38M601
|
1’ (305) Infeed chute, Sidewall Cleated, for 2’ (610) long section |
38M602
|
2’ (610) Infeed chute, Sidewall Cleated, for 3’ (914) long section |
38M603
|
3’ (914) Infeed chute, Sidewall Cleated, for 4’ (1219) long section |
| 38M604 |
4’ (1219) Infeed chute, Sidewall Cleated, for 5’ (1524) long section |
|
LPZ Hinged Shute Extensions |
 |
Part Number |
Description |
38M302
|
Extensions, 02’ (610) chute |
38M303
|
Extensions, 03’ (914) chute |
| 38M304 |
Extensions, 04’ (1219) chute |
|
LPZ Backstop for Horizontal Infeed Chute |
 |
For Standard Cleated Belt Conveyors |
| Part Number |
Description |
38M108
|
Backstop, Standard Cleated, 08 conveyor width reference |
38M112
|
Backstop, Standard Cleated, 12 conveyor width reference |
38M118
|
Backstop, Standard Cleated, 18 conveyor width reference |
| 38M124 |
Backstop, Standard Cleated, 24 conveyor width reference |
| For Sidewall Cleated Belt Conveyors |
| Part Number |
Description |
38M408
|
Backstop, Sidewall Cleated, 08 conveyor width reference |
38M412
|
Backstop, Sidewall Cleated, 12 conveyor width reference |
38M418
|
Backstop, Sidewall Cleated, 18 conveyor width reference |
| 38M424 |
Backstop, Sidewall Cleated, 24 conveyor width reference |
|
Stops |
Adjustable Stop |
 |
• Slides up and down T-slot length.
• Includes metric mounting hardware |
| Part Number |
Description |
| 3076WWM |
Adjustable Stop |
|
WW = Conveyor Width Reference |
Brackets |
Table Top Mounting Bracket |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 200349M |
Table top bracket |
|
Note: If the discharge end of conveyor is
mounted over a table or similar structure,a
conveyor bottom wiper must be installed to
prevent against possible pinch point. Order
bottom wiper separately. |
Frame Mount Casters |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 390207 |
Frame mount casters, pair. |
|
|
Floor Mount Brackets |
 |
• Includes metric mounting hardware |
| Part Number |
Description |
| 390217 |
Floor mount brackets, pair. |
|
|
Due to the wide variety of possible conveyor setups, adaption of the supplied guarding material is the responsibility of the end user.
Contact Form 
