Contact Form LPZ SERIES CONVEYORS: Flat Belt End Drive
Specifications:
- Belt widths: 3.75" (95) to 48" (1,219)
- Conveyor lengths: 4' (1,219) to 40' (12,192)
- 1.62" (41) of belt take-up on conveyors up to 20" long
- 3.24" (82) of belt take-up on conveyors over 20" long
- Loads up to 400 lbs.* (181)
- Adjustable angle, 0°-35°
- Belt speeds to 421 ft/min (128 M/min)
- 3" (76) diameter drive pulley turns approximately 9.7" (246) of belt per revolution
- Metric fasteners
Features/Benefits:
- Nose-over and walk-thru configurations
- Quick 5 minute belt change
- Adjustable angle frames conform to applications
- Rack and pinion belt tensioning for fast, accurate single point belt tensioning
- Steel nitrite coated head plates eliminate painted surfaces
- V-groove bed plate with guided belt provides positive belt tracking, even under demanding side load applications
- Strong, box-like construction resists damaging frame twist
- Stand mounting brackets and return belt rollers are easily re-positioned along the frame
- Special length conveyors to .12" (3) increments at standard price and delivery
- Special width conveyors to 2" (51) increments at standard price and delivery
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors
Optional Interface Tail Section
- Sealed bearing
- 1" (25) diameter rollers
- Widths up to 48" (1219)
- Available at non-driven end
to assist in small part transfers
| STANDARD SIZES | ||||
|---|---|---|---|---|
| Conveyor Width Reference | 04 | 06 | 02 increments up to... | 48 |
| Conveyor Belt Width (W) | 3.75" (95) |
6" (152) |
2" (51) increments up to... | 48" (1,219) |
| *Section Length Reference | 0200 | 0001 increments up to... | 3800 | |
| Conveyor Length (L) | 2' (610) | .12" (3) increments up to... | 38' (11,582) | |
| L1 + L2 + L3 = Maximum 40' (12,192) long conveyor | ||||
Notes:
- Note: Conveyors wider than 40" (1,016) require V-Guide belt tracking
- Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
- Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
- Dimensions are represented in inches, feet, and (millimeters).
- Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
- Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.