Contact Form LPZ SERIES CONVEYORS: Sidewall Cleated Belt End Drive
Specifications:
- Belt widths: 8” (203) to 24” (610)
- Conveyor lengths: 4’ (1,219) to 25’ (7,620)
- 1.62” (41) of belt take-up
- Load up to 100 lbs.* (45 kg)
- Adjustable angle, 25?q - 60?q
- Available with 20 mm, 30 mm, & 40 mm cleat & sidewall heights
- Belt speeds to 275 ft/min (83.8 M/min)
- Belt direction is not reversible
- 3” (76) dia. drive pulley turns approximately 9.7” (246) of belt per revolution
- Metric fasteners
Features/Benefits:
- Z-Frame, nose-over and horizontal-to-incline configurations
- Low maintenance sealed bearings
- Rack and pinion belt design offers single point belt tensioning
- High strength anodized aluminum frame with clear coat finish
- T-Slots for easy mounting of pre-engineered accessories
- V-guided belts eliminate tracking adjustments
- Quick belt change increases uptime
| STANDARD SIZES | |||
|---|---|---|---|
| Conveyor Width Reference | 08 | 02 increments up to... | 24 |
| Conveyor Belt Width (W) | 8” (203) |
2” (51) increments up to... | 24” (610) |
| Pocket Width | 3” (76) |
2” (51) increments up to... | 19” (482) |
| Section Length Reference | 0200 | 0001 increments up to... | 1300 |
| Section Length (L) | 2’ (610) |
.12” (3) increments up to... | 13’ (3,962) |
| L1 + L2 + L3 = Maximum 25’ (7,620) long conveyor. | |||
Notes:
-
Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
-
Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
-
Dimensions are represented in inches, feet, and (millimeters).
-
Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
-
Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.