LPZ Series Conveyors From Dorner Mfg. Corp.

LPZ Flat Belt Conveyors
Nose-over and Walk-Thru Conveyors
Section Length	Number of Supports per Section
Section Length	Section L2	Sections L1 & L3
2’ to 13’ 14’ to 25’ 26’ to 37’ 38’ to 49’ 50’ to 61’ 62’ to 73’ 74’ to 85’ 86’ to 97’	2 3 4 5 6 7 8 9	1 2 3 4 5 6 7 8

3200 & LPZ (per section) Required Return Roller
max feet between return rollers
Conveyor Width	3.75”- 10”	12”- 20”	22”- 30”	32”- 40”	40”- 48”
Flat Belt Cleated Belt	8 6	7 5	6 4	5 n/a	4 n/a

LPZ Cleated Belt Conveyors
Horizontal to Incline and Nose-over
Total Conveyor Length	Number of Supports
4’ and 5’ 5’ to 25’	2 3

Quanity of return rollers required = whole number result of :

Example
Description:3200 cleated belt 18” wide x 21’ long

4 return rollers required

Cleated Stand Mounting Bracket

Part Number	Description
240838	Stand Mounting Bracket, Cleated Belt Conveyor

Flat Belt Stand Mounting Bracket

Part Number	Description
240839	Stand Mounting Bracket, Flat Belt Conveyor

Note: Conveyors can be ordered with the required number of mounting brackets. If desired, order additional mounting brackets separately.

Cleated Stand Mounting Bracket

Part Number	Description
240832	Return Roller for 2200 Series, Cleated Belt

Flat Belt Return Roller for 8” to 48” Wide Conveyors

Flat Belt Return Roller for 2” to 6” Wide Conveyors

Part Number	Description
240830	Return Roller for 2200 Series 2” (44) - 6” (152) wide Flat Belt conveyors

Adjustable Tie Bracket
	• Compatible with steel and aluminum support stands. • Secure critical stand and conveyor locations. • Length (L) adjusts + 0”, - 11.25” (286 mm). • Includes metric mounting hardware.
	Part Number	Description
	27M400-02 27M400-03 27M400-04 27M400-05 27M400-06	Adjustable Tie Bracket, 2’ (610) Adjustable Tie Bracket, 3’ (914) Adjustable Tie Bracket, 4’ (1,219) Adjustable Tie Bracket, 5’ (1,524) Adjustable Tie Bracket, 6’ (1,829)

Bottom Mount Stand Bracket
	• Bolts to 90˚ standard load gearmotor • Includes metric mounting hardware
	Part Number	Description
	699702M 6997WWM	“L” Bracket only, for 2” to 5” wide conveyors. Bracket Assembly, 06 and wider 2200 conveyors.

Diagonal Bracing
	• For use on steel, aluminum and single post support stands with casters. • Metric fastener mounting hardware included. • For use on all stands with casters and any stands over 72” (1829) tall. • One brace per stand for conveyors up to 24” wide (610) • Two braces per stand for conveyors over 24” wide (610)
	Part Number	Description
	710046 710047 710247	for two-legged H style stands up to 30” tall (762) for two-legged H style stands over 30” tall (762) for Single Post and Pillar stands over 30” tall (762)

Common Mount Kit
Adds 2” (51) to stand height Adds 2.79” () to overal stand width	• Stand accessory for mounting multiple conveyors in parallel to one stand.

Tall Support Stands
	Tall Stands are the Fixed Height and Adjustable Height Stands as shown with additional outrigger support for added stability. These outriggers are required when the height of the stand exceeds 3.5x its width, and they add 16” to stand width. Tall stands over 6’ tall include diagonal bracing.
	Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user.

Fine Adjustment Kit
• Provides fine height adjustment via a threaded bolt. • For use with Fixed Height Stands.

LPZ SERIES CONVEYORS: Support Stands