MPB SERIES CONVEYORS: Sidewall Cleated Belt End Drive

• Conveyor Overview
• Flat Belt End Drive
• Cleated Belt End Drive
• Sidewall Cleated Belt End Drive

• Profiles
• Belting
• Gearmotor Mounting Packages
• Gearmotors
• Support Stands
• Accessories
• Performance Charts / Data

Specifications:

• Sealed ball bearings.
• 1.18” (30) minimum cleat spacing.
• 2” (51) high cleats, other heights available, contact factory.
• .59” (15) pitch belt.
• 2.6” (66) diameter drive pulley.
• Loads up to 150 lbs. (68 Kg).
• Belt speeds up to 150 Ft/min. (46 M/min).
• 11.25” (286) minimum, 23.25” (591) maximum conveyor belt widths.
• 2’ (610) minimum, 30’ (9,144) maximum conveyor lengths.
• 12 mm integral drive shaft.
• Metric fasteners.
• models available

Features/Benefits:

• Rugged spherical ball bearings are sealed for life.
• Small .59” (15) chain pitch for smooth belt operation.
• 2.6” (66) diameter end pulley for small product transfers.
• Minimal catenary belt sag reduces cordial action & improves safety.
• Fully supported & guided belt reduces noise & offers improved side load.
• Special length conveyors at standard price and delivery.

Perforated Bedplate Option
for cooling / draining
applications.
(12” and wider)

View Part Number Reference

Notes:

• Conveyor load capacity depends on conveyor size, incline, motor position, accumulated loads and other factors. See Performance Charts / Data for details.
• Order gearmotor mounting packages and gearmotors separately - see Mount Packages and Gearmotors. For support stands and accessories - see Support Stands and Accessories.
• Dimensions are represented in inches, feet, and (millimeters).
• Due to the wide variety of drive set-ups and applications, point of installation guarding is the responsibility of the end user.
• Conveyors longer than 12’ (3658mm) will be constructed using a multiple piece frame. Consult factory for locations of these frame joints. It is recommended that each frame joint be supported by a stand or other means.