MPB SERIES CONVEYORS: Support Stands
| Quantity Charts |
Support Stand Quantity Chart |
| Conveyor Length |
Number of Supports |
| 2’ (610) - 4’ (1219) |
1* |
| 2’ (610) - 6’ (1829) |
2 |
| 7’ (2134) - 12’ (3658) |
3 |
| 13’ (3962) - 18’ (5486) |
4 |
| 19’ (5791) - 24’ (7315) |
5 |
* End Drive Conveyors with Single-Post Support Stands only. Requires the use of diagonal bracing, see page 71.
Heavy load gearmotors require a minimum of 2 stands to support conveyor and gearmotor package.
|
|
| Mounting Brackets |
Cleated Stand Mounting Bracket |
 |
| Part Number |
Description |
| 240838 |
Stand Mounting Bracket, Cleated Belt Conveyor |
|
Flat Belt Stand Mounting Bracket |
 |
| Part Number |
Description |
| 240839 |
Stand Mounting Bracket, Flat Belt Conveyor |
|
Note: Conveyors can be ordered with the required number of mounting brackets. If desired, order additional mounting brackets separately. |
| Stand Accessories |
Adjustable Tie Bracket |
|
|
• Compatible with steel and aluminum support stands.
• Secure critical stand and conveyor locations.
• Length (L) adjusts + 0”, - 11.25” (286 mm).
• Includes metric mounting hardware. |
Part Number |
Description |
27M400-02
27M400-03
27M400-04
27M400-05
27M400-06 |
Adjustable Tie Bracket, 2’ (610)
Adjustable Tie Bracket, 3’ (914)
Adjustable Tie Bracket, 4’ (1,219)
Adjustable Tie Bracket, 5’ (1,524)
Adjustable Tie Bracket, 6’ (1,829) |
Diagonal Bracing |
|
|
• For use on steel, aluminum and single post support stands with casters.
• Metric fastener mounting hardware included.
• For use on all stands with casters and any stands over 72” (1829) tall.
• One brace per stand for conveyors up to 24” wide (610)
• Two braces per stand for conveyors over 24” wide (610) |
Part Number |
Description |
710046
710047
710247 |
for two-legged H style stands up to 30” tall (762)
for two-legged H style stands over 30” tall (762)
for Single Post and Pillar stands over 30” tall (762) |
Common Mount Kit |
*Adds 2” (51) to stand height
*Adds 2.79” () to overal stand width
|
• Stand accessory for mounting multiple conveyors in parallel to one stand.
|
|
Tall Support Stands |
|
Tall Stands are the Fixed Height and Adjustable Height Stands as shown with additional outrigger support for added stability. These outriggers are required when the height of the stand exceeds 3.5x its width, and they add 16” to stand width. Tall stands over 6’ tall include diagonal bracing. |
Note: Due to the wide variety of conveyor and stand options along with possible configurations, stability of the final setup is the responsibility of the end user.
|
|
Fine Adjustment Kit |
• Provides fine height adjustment via a threaded bolt.
• For use with Fixed Height Stands.
|
|
| Fixed Height Support Stands |
Fixed Foot Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH)* |
15 – 19
(381-483) |
in 1” (25) increments up to... |
95 – 99
(2413-2515) |
| Part # Reference |
1519 |
in 0101 increments up to... |
9599 |
Swivel Locking Caster Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH)* |
20 – 24
(508-610) |
in 1” (25) increments up to... |
68 – 72
(1727-1829) |
| Part # Reference |
2024 |
in 0101 increments up to... |
6872 |
* Dependent on stand width, stands over 42” (1067) may include outriggers
Full width top plate on 12” wide stands only
|
• Metric fasteners
• 4” (102) Height Adjustment
|
| Adjustable Height Support Stands |
Fixed Foot Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH)* |
12-13
(305-300) |
13-15
(330-381) |
14-17
(356-432) |
16-21
(406-660) |
19-26
(483-686) |
24-36
(610-914) |
30-48
(762-1219) |
42-60*
(1067-1524) |
54-72*
(1372-1829) |
66-84*
(1676-2134) |
78-96*
(1981-2438) |
| Part # Reference |
1213 |
1315 |
1417 |
1621 |
1926 |
2436 |
3048 |
4260 |
5472 |
6684 |
7896 |
|
Swivel Locking Caster Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH)* |
17-18
(432-457) |
18-20
(457-508) |
19-22
(483-559) |
21-26
(533-660) |
24-31
(610-787) |
29-41
(737-1041) |
35-53
(762-1346) |
47-65*
(1194-1651) |
59-77*
(1499-1956) |
| Part # Reference |
1718 |
1820 |
1922 |
2126 |
2431 |
2941 |
3553 |
4765 |
5977 |
* Dependent on stand width, stands over 42” (1067) may include outriggers
Full width top plate on 12” wide stands only
|
• Metric fasteners
|
| Single Post & Piller Support Stands |
STANDARD SIZES |
| Stand Width (WW) |
1.75
(44) |
2.75
(70) |
3.75
(95) |
5
(127) |
6
(152) |
8
(203) |
10
(254) |
12
(305) |
14
(356) |
16
(406) |
18
(457) |
| Part # Reference |
02 |
03 |
04 |
05 |
06 |
08 |
10 |
12 |
14 |
16 |
18 |
| Stand Height (HH) |
16 - 26
(406-660) |
24 - 34
(610-864) |
32 - 42
(813-1067) |
40 - 50
(1016-1270) |
48 - 58
(1219-1473) |
| Part # Reference |
16 |
24 |
32 |
40 |
48 |
| Base Diameter (BD) |
24 (610) |
27 (686) |
30 (762) |
33 (838) |
36 (915) |
• Casters do not change overall height
• Metric fasteners
|
Single Post
Support Stand
|
Pillar Stand
(must be secured
to floor)
|
| Short Support Stands |
Fixed Foot Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH) |
06 – 08
(152-203) |
in 1” (25) increments up to... |
12– 14
(305-356) |
| Part # Reference |
0608 |
in 0101 increments up to... |
1214 |
Swivel Locking Caster Model |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH) |
11 – 13
(279-330) |
in 1” (25) increments up to... |
17 – 19
(432-483) |
| Part # Reference |
1113 |
in 0101 increments up to... |
1719 |
|
Full width top plate on 12” wide stands only
|
| Fully Adjustable Support Stands |
Fixed Foot Model |
| Stand Width (WW) |
1.75 (44) |
2.75 (70) |
3.75 (95) |
5 (127) |
6 (152) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
02 |
03 |
04 |
05 |
06 |
02 increments up to... |
48 |
| Stand Height (HH) |
7 - 19
(179-483) |
12 - 31
(305-787) |
12 - 43
(305-1097) |
12 - 55
(305-1397) |
12 - 67
(305-1702) |
| Part # Reference |
0719 |
1231 |
1243 |
1255 |
1267 |
Swivel Locking Caster Model |
| Stand Width (WW) |
1.75 (44) |
2.75 (70) |
3.75 (95) |
5 (127) |
6 (152) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
02 |
03 |
04 |
05 |
06 |
in 02 increments up to... |
48 |
| Stand Height (HH) |
12 - 19
(305-483) |
17 - 31
(432-787) |
17 - 43
(432-1097) |
17 - 55
(432-1397) |
17 - 67
(432-1702) |
| Part # Reference |
1219 |
1731 |
1743 |
1755 |
1767 |
|
• Metric fasteners
|
| Multi Tier Stands |
Base |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH) |
12 (305) |
in 2” (51) increments up to... |
60 (1524) |
| Part # Reference |
1212 |
in 0002 increments up to... |
1260 |
Tier |
| Stand Width (WW) |
12 (305) |
2” (51) increments up to... |
48 (1219) |
| Part # Reference |
12 |
in 02 increments up to... |
48 |
| Stand Height (HH) |
12 (305) |
in 1” (25) increments up to... |
36 (914) |
| Part # Reference |
0712 |
in 0001 increments up to... |
0736 |
Note: Do not use with support stands equipped with casters. Support Stands
must be anchored to the floor. Do not use if conveyed product overhangs the edge
of the conveyor belt due to pinch point created.
Full width top plate on 12” wide stands only
|
Minimum Tier Height Per Conveyor |
| 2200 Flat Belt |
12” (305) |
| 2200 Cleated Belt |
15” (381) |
|
Contact
Form 
