Product Transfers

Product transfers are often the hardest part of establishing a production line. Whether you want to maintain the leading edge, change the leading edge, flip the product or count the product, side transfer, end to end transfer, cascade the product, Dorner is known as the transfer expert. Dorner has experience transferring product in over 1200 different industries.

All of Dorner’s products are designed with smaller end pulleys to facilitate product transfers with additional options when a tighter transfer is needed.

2200 Series 8mm Nose Bar Transfer
is available at non-driven end.
Max Belt Speed is 75’/min (22M/min)

3200 Series 1" Interface Tail Section
is vailable at non-driven end
to assist in small part transfers

Dorner offers 90-degree adjustable transfer kits that are pre-engineered to guide a variety of products.

Plastic chain curves in both aluminum and stainless steel frame options are available to minimize product transfers. When special transfer options need to be designed Dorner also has designed center drives, magnetic and vacuum options to assist in the product transfer operations.

Product Line	Where to use	Conveyor Type	Belt Type
2200 Series	Lightweight applications up to 80 lbs. Offers optional nose bar transfer.	Straight Aluminum Frame	Urethane belt.
3200 Series	Heavy duty applications up to 1000 lbs and where higher speeds may be necessary. Offers optional nose bar transfer.	Straight Heavy-duty Aluminum frame	Urethane belt.
3200 MPB	Heavy duty applications up to 1000 lbs and where higher speeds may be necessary.	Straight & Curve Heavy-duty Aluminum Frame	Open or closed mesh modular plastic belting.
AquaPruf 7400 Series	Conveying larger, durable and individual portions of product. Heavy-duty washdown requirements for full production lines. Low friction modular plastic belting also offers cut resistance benefits.	Straight & Curve Stainless Frame	Open or closed mesh modular plastic belting.
AquaPruf 7600 Series	Conveying smaller, delicate and bulk product. Heavy-duty washdown requirements for full production lines. Low & High friction belting available as well as cut resistant options.	Straight & Curve Stainless Frame	FDA approved belt options: cleated, edge sealed, encased and solid urethane.
90 Transfer Kits	When smooth 90° product transfers are essential. Easily adjusts for quick product change-over.	2200, 3200 & LPZ Series	Do not use with High Friction Belts on Infeed Conveyor
Magnetic	Hold Ferrous parts fast to the belt. Ideal for elevation changes or part holding.	2200, 4100 & 6200 Series	Recommended Belt Types: FDA High Friction & Electrically Conductive Belt
Vacuum	Holds flat parts of any material fast to the belt. Ideal for elevation changes or part holding.	2200 & 3200 Series	Recommended Belt Types: FDA High Friction & Electrically Conductive Belt